Split Nylon Y-Fitting for Corrugated Conduit

GYTF

Product Overview

Split Nylon Y-Fitting for Corrugated Conduit

Adding a branch to a corrugated conduit run with a closed Y-fitting means feeding the wires through the fitting from the conduit end, so an existing harness has to come apart first. The GYTF opens up instead: snap the conduit into the matching ports, close the body, and lock it with the clip. Nothing is threaded on from the end, and one conduit run splits into a main line and a branch.

The body is injection molded from PA66 nylon with a UL 94 V-2 flame rating. It is non-metallic and won't rust, and the thick-walled body with its clip lock stands up to pulling and long-term use. Equal and reducing sizes fit conduit OD from 10 mm to 34.5 mm (AD10 to AD34.5). Select by the conduit size of the main run and the branch.

Key Features

  • UL 94 V-2 flame rating: PA66 nylon body, flame retardant
  • Fits 10–34.5 mm conduit OD (AD10–AD34.5): Equal and reducing sizes available
  • Split body, no threading: Snap the conduit in and lock it with the clip; no need to feed it on from the conduit end
  • PA66 nylon: Non-metallic, won't rust, corrosion-resistant
  • Thick-walled body: Clip-locked construction that stands up to pulling and long-term use

Technical Specifications

SpecificationValue
MaterialPA66 nylon
Flame RatingUL 94 V-2
StructureSplit body with clip lock
InstallationSnap-fit
Conduit OD10–34.5 mm (AD10–AD34.5)
ColorBlack

Note: AD is the corrugated conduit OD code in millimeters (for example, AD21.2 = 21.2 mm OD). Port sizes A, B, and C, plus the length and height of each size, are listed in the product data table below.

Engineering Drawing

Split Nylon Y-Fitting for Corrugated Conduit GYTF dimension drawing

A, B, and C are the conduit ODs that fit each of the three ports. LENGTH is the overall length; ALTITUDE (overall height) is the overall height of the fitting.

Applications

🔀

Branching a Wire Harness

Split one conduit run into a main line and a branch. Choose an equal size when both conduits share the same OD and a reducing size when they differ, then check ports A, B, and C in the data table.

🔧

Machine and Control Panel Wiring

The split body snaps onto the conduit without feeding it on from the end, which makes adding or rerouting a branch in the field easier.

🏭

Harness Layout for Equipment Builders

Equal and reducing combinations cover conduit OD from 10 mm to 34.5 mm, so fittings can be matched to the size of each harness.

FAQ

Q1|What conduit sizes does the GYTF fit?

The GYTF fits corrugated conduit OD from 10 mm to 34.5 mm (AD10 to AD34.5). Equal sizes are available in 10, 13, 15.8, 18.5, 21.2, 25, and 28.5 mm (AD10 through AD28.5), plus reducing combinations. For the A, B, and C port sizes of each model, see the product data table on this page, or email your requirements and the sales team will help select the right size.

Q2|Should I choose an equal or a reducing Y-fitting?

If the main run and the branch use conduit with the same OD, choose an equal size. If the ODs differ, choose a reducing size. To select, match the conduit OD (AD) to columns A, B, and C in the data table.

Q3|How do I install the split Y-fitting?

Open the body, snap the conduit into the matching ports, then close the body and lock the clip. The conduit does not need to be fed in from the end. After installation, check that the clip is fully engaged and the conduit sits tight in each port.

Q4|What is the GYTF made of, and what is its flame rating? What if I need a waterproof fitting?

The GYTF is made of PA66 nylon with a UL 94 V-2 flame rating, and the non-metallic body won't rust. No IP rating is specified for the GYTF. For applications that need a waterproof fitting, see the Waterproof Y-Type Corrugated Tube Fitting GY-AD.

Q5|Can I request samples or other sizes?

Yes, samples are available on request. Fill out the contact form or click Send Inquiry Email above, and include your conduit size combination and application. For size combinations not listed, email the sales team with your requirements to request a quote.

Features

{{ typeOne.merge }}
{{ itemOneTitle }}
{{ item }}

Specifications

{{ typeTwo.merge }}
{{ itemTwoTitle }}
{{ item }}
{{ typeThree.merge }}
{{ itemThreeTitle }}
{{ item }}