Heat Shrinkable Tubing with Adhesive



Heat Shrinkable Tubing with Adhesive

 is an ideal solution for insulation, waterproofing, and sealing purposes. The outer layer is made of polyethylene (Abbreviated PE), which provides excellent resistance to corrosion, abrasion, and UV. The inner layer is coated with low melting point adhesive, offering mechanical strain buffering property to protect wiring harness or wire contacts from leakage, corrosion, or moisture. Our Heat Shrinkable Tubing with Adhesive also meets international standards such as UL, RoHS, REACH, and is halogen-free.


  • Material:Polyethylene
  • Shrink Ratio: 3:1
  • Continuous Operating Temperature:-55℃~125℃
  • Shrink Temperature:70℃
  • Longitudinal Shrinkage: ≤±5%
  • Voltage: 600V
  • UL NO.E479000


  1. 5 Reasons to Choose Heat Shrink Tubing with Adhesive

    Excellent Insulation

    The outer layer of the adhesive-lined heat shrink tubing provides excellent insulation to protect wires or cables from damage or short circuits.

    Waterproof and Moisture Resistant

    The adhesive-lined heat shrink tubing has good waterproof properties, which can effectively prevent water from entering the interior of the wire, reducing faults and damage caused by humidity.

    Corrosion Resistance

    The adhesive-lined heat shrink tubing has excellent corrosion resistance, which can effectively prevent corrosion of wires by chemicals and oxidants, thereby extending the service life of the wires.

    Superior Mechanical Performance

    The inner layer of the adhesive-lined heat shrink tubing has a low-melting-point hot-melt adhesive, which provides mechanical strain relief, making it more stable in mechanical stress environments.

    Environmentally Friendly and Safe

    The adhesive-lined heat shrink tubing complies with environmental standards such as UL, RoHS, and REACH, and is halogen-free, which will not harm the environment or human health, making it more safe and reliable to use.

  2. Differences between Heat Shrink Tubing and Adhesive-Lined Heat Shrink Tubing

    Heat shrink tubing and adhesive-lined heat shrink tubing differ in their composition. While both consist of a polymeric material that shrinks in size when heated, adhesive-lined tubing also has an inner layer of thermoplastic adhesive that melts and flows when heated, creating a seal around the object being covered. This provides additional protection against moisture, corrosion, and other environmental hazards. Heat shrink tubing is primarily used for insulation and bundling purposes, while adhesive-lined heat shrink tubing is more commonly used for waterproofing and sealing applications.。

Certificate from the Third Party


Engineering Picture



{{ typeOne.merge }}
{{ itemOneTitle }}
{{ item }}


{{ typeTwo.merge }}
{{ itemTwoTitle }}
{{ item }}
{{ typeThree.merge }}
{{ itemThreeTitle }}
{{ item }}