Polyester Hot Melt Adhesive for Low Pressure Molding (Made in Japan)

GMM70

Product Overview

Polyester Hot Melt Adhesive for Low Pressure Molding (Made in Japan)

Potting connectors, terminals, and PCBs ties up labor and floor space for mixing, dispensing, and waiting on cure. GMM70 is a thermoplastic polyester hot melt in pellet form, made in Japan, for low pressure molding and overmolding as a potting replacement. It melts at 180 °C to 200 °C, fills the mold at low pressure, and sets as it cools, so each cycle takes tens of seconds to a few minutes.

Low pressure molding fills only the mold cavity, so it uses less material, labor, and work-in-process space than potting. Compared with polyamide (PA) hot melts, polyester grades bond better to PVC and metals and seal more effectively, which suits connectors, terminals, PCBs, sensors, and automotive camera modules that need protection from water and dust. GMM70 is available in light brown and black. If you already run low pressure molding, test a sample on your actual components and mold. If you have not adopted the process or have no equipment yet, you can also ask us about mold design and molding services.

Key Features

  • Melt temperature 180 °C to 200 °C: low pressure molding reduces heat stress on PCBs and sensors
  • Softening point 153 °C: sets as it cools to hold its shape and protect encapsulated components
  • Hardness 81A: Shore A; soft and flexible, softer than polyamide grades
  • Elongation at break 1,000%: tensile strength 8.7 MPa, so the molded part flexes with minor component movement
  • UL 94 HB / V-2: HB at 1.5 mm minimum thickness in all colors, V-2 at 3.0 mm in black; the rating depends on thickness

Technical Specifications

Property Value Test Conditions / Notes
Model GMM70 —
Country of Origin Japan —
Material Thermoplastic polyester hot melt adhesive —
Color / Form Light brown, black / pellets Pellet size approx. φ2.5 × 3.0 mm
Specific Gravity 1.12 —
Hardness (Shore A/D) 81A Durometer A
Melt Viscosity (mPa·s) 65,000 mPa·s at 190 °C Brookfield-type viscometer, 1 rpm
Softening Point 153 °C —
Tensile Strength at Break 8.7 MPa —
Elongation at Break 1,000% —
Flammability Rating UL 94 HB / V-2 HB: all colors, 1.5 mm minimum thickness; V-2: black at 3.0 mm (per UL Yellow Card data)
Recommended Melt Temperature 180 °C to 200 °C Keep residence time short to avoid thermal degradation
Pre-Drying 60 °C × 3 h or longer (recommended) Dry pellets before melting
Packaging 10 kg per carton Contact us for other packaging

Values above are typical values from the manufacturer's datasheet, not guaranteed specifications. Actual molding conditions and bond performance vary with the substrate, component design, and mold, so test a sample first. Store in a cool, dry place away from direct sunlight.

Material Supply and Low Pressure Molding Evaluation: Inquiries Welcome

In addition to material supply, Good Gi offers mold design and molding services. Whether you are purchasing material only or planning to adopt a low pressure molding process, please contact our team.

Contact Us Today

Applications

🔌

Connector and Terminal Overmolding

Low pressure overmolding encapsulates connectors and terminals, secures the cable exit, and keeps out dust and moisture without the mixing and cure time of potting.

📟

PCB and Sensor Encapsulation

Low molding pressure puts less stress on PCBs and sensors. Encapsulation is done in a single shot, which shortens cycle time and frees up fixtures.

💧

Water and Dust Sealing

Bonds well to PVC cable jackets and metal terminals, so it suits wire harness connections that need a sealed enclosure. Actual ingress protection depends on the part design.

📷

Automotive Camera Module Encapsulation

Encapsulates the PCB and cable exit of automotive camera modules, sealing and securing them in a single shot. Automotive requirements follow customer and OEM specifications, so validate a sample first.

FAQ

Q1|What is the difference between low pressure molding and potting?

Potting requires mixing and dispensing, then hours or even days of cure time. GMM70 is melted, injected into a mold, and sets as it cools, so each cycle takes tens of seconds to a few minutes. Low pressure molding fills only the mold cavity, so it uses less material and does not tie up space while parts cure. Whether it fits your part depends on the component's heat tolerance and design. If you already run low pressure molding, we recommend testing a sample first. If you have not adopted the process or have no equipment yet, ask us about a feasibility evaluation as well as mold design and molding services. Use the contact form or click "Send Email" above to get in touch.

Q2|Polyester vs. polyamide (PA) hot melt: which should I choose?

Polyamide (PA) hot melts are a common choice for low pressure molding. GMM70, a polyester grade, bonds better to PVC and metals, is softer and more flexible, and offers better electrical insulation, which makes it suited for applications that need water and dust sealing. For low-surface-energy plastics such as PP, apply a surface treatment such as corona treatment before molding. To request comparison data, use the contact form or click "Send Email" above and include the substrate materials and operating environment. The sales team will help you select a material.

Q3|What melt temperature should I use, and what precautions apply?

Melt GMM70 in extrusion-type or injection-type hot melt equipment at 180 °C to 200 °C, and keep residence time at temperature as short as possible to avoid thermal degradation. Dry the pellets at 60 °C for at least 3 hours before melting. Wear safety glasses and gloves, and work in a well-ventilated area away from ignition sources. Store in a cool, dry place away from direct sunlight.

Q4|What is the UL 94 flammability rating, and how does GMM70 hold up to chemicals?

The UL 94 rating of GMM70 depends on thickness and color: HB in all colors at a minimum thickness of 1.5 mm, and V-2 in black at 3.0 mm. V-0 is not listed. Check the rating against your actual molded wall thickness. If your application requires a higher flammability rating, tell us your requirements and the sales team will evaluate options. UL Yellow Card data and immersion test data for oil and common chemicals are available on request. Use the contact form or click "Send Email" above to request them, and include the media and temperatures involved.

Q5|What colors are available, and can I inquire without low pressure molding equipment?

GMM70 comes in light brown and black pellets. Standard packaging is a 10 kg carton; contact us for other packaging. If you already run low pressure molding, you can request samples and the datasheet. If you have not adopted the process or have no equipment yet, you can also ask us about mold design and molding services in addition to the material. Use the contact form or click "Send Email" above and describe the part being molded and your requirements, so the sales team can help with the evaluation.

Features

{{ typeOne.merge }}
{{ itemOneTitle }}
{{ item }}

Specifications

{{ typeTwo.merge }}
{{ itemTwoTitle }}
{{ item }}
{{ typeThree.merge }}
{{ itemThreeTitle }}
{{ item }}